custom gift for Graduation

vintage cushion covers How to Make a Zip Bag from Old Ties customized gifts for mom
vintage cushion covers

HOME: custom gift for Graduation > vintage cushion covers >

vintage cushion covers How to Make a Zip Bag from Old Ties customized gifts for mom

Updated: 2020/03/29 Views: 63

My husband was about to give away a bunch of stained and old neckties, sensing a creative project I snagged them before they were donated.

I turned the old ties into these DIY Necktie Zip Pouches. A very very simple sewing project that would make great DIY gifts for your favorite guy!

bed pillow covers

I first posted this tutorial several years ago. Today I’;m giving it a refresh and updating and clarifying the content and descriptions.

In the years since I’;ve posted this Upcycled Neck Tie project, I’;ve heard from many readers who were searching for something to do with old ties. Most of the timevintage cushion covers, it was because a special someone passed away and they didn’;t want to get rid of all of their precious items.

A friend of mine had a father in law pass away who had 12 grandchildren. They made one of these necktie zip pouches for each of the grandchildren (boys and girls). I thought it was such a touching way to remember their loved one.

Each pouch is made from 2 ties, one for the front of the pouch and one for the back.

You will also need other supplies like interfacing and zippers. Those supplies will be listed below.

Are you surprised you can get so much fabric from a tie? So was I!

I had so much fun making these that I just kept going and made more. I think that this would be a great handmade gift for a man for Christmas but would work equally for a girl.

For one of the pouches I added a contrast stripe to the center (the fabric that’;s on the back of the pouch). You could have a lot of fun mixing and matching the patterns of the ties.

I even reused the tag from the back of the tie, a fun little touch especially if the ties are sentimental.

Want to make one? Here’;s how!

Begin by carefully pulling the stitches out of the back of the necktie. Most ties are basted together and the stitches should come out easily. Open up and continue unpicking the tie down to the point.

Next remove all of the interfacing and press the fabric from the front of the tie well. You’;ll need some steam to get it to lay flat again.

From the tie, cut a piece that is 10”; wide and 7”; tall. Start measuring 10”; from the widest part of the fabric. You can adjust the size if you need to based on the size of your tie, but this is pretty standard.

Cut a second tie piece from your other Tie fabric.

From Fusible Fleece Cut:

2 Pieces 7″; x 10″;

From Shape Flex Interfacing Cut:

2 pieces 7″; x 10″;

From Lining Fabric Cut:

2 pieces 7″; x 10″;

Iron the Shape-Flex interfacing onto the back of the 2 pieces cut from the tie.

Iron fusible fleece onto the back of two fabric lining pieces.

Cut from the tie another piece of fabric that is 3”; x 5”;. Fold the fabric in half lengthwise and press. Open up and turn under each long end 1/4”; and press.

Cut this piece in half lengthwise so that you have 2 folded pieces.

Pin one folded piece over the end of each end of the zipper so that 1/2”; of the zipper is covered by the fabric. Top stitch in place. Trim fabric to width of zipper.

Fold the tag of the tie in half and stitch to the right side of one of the cut tie pieces.

Next make a “;sandwich”; with the zipper in the middle.

The right side of the zipper will be facing the right side of the tie fabric, the wrong side of the zipper will be facing the right side of the lining fabric.

Using a zipper foot stitch this seam, I recommend a 1/4”; –; 3/8”; seam allowance.

Repeat for the other side of the zipper.

Press the seams away from the zipper and top stitch along both sides of the zipper. This will help keep your lining out of your zipper and you zip and unzip the pouch.

Unzip the zipper.

Pin the pouch with outside pieces matching and lining pieces matching. Pin zipper towards lining pieces. Stitch with a 1/2”; seam allowance round the entire pouch leaving a 4”; opening in the lining to turn the pouch right side out.

Clip the corners and trim the seam allowances on the lining down to 1/8”;. Turn the pouch right side out. Slip stitch opening closed and press well!

Have fun making zip pouches!

(or anyone for that matter! It doesn’;t have to be just guys!)

How to Sew a Bow Tie (with free downloadable PDF Pattern)

Dad’;s Travel Bag Sewing Pattern

Leather Trimmed Dopp Case Tutorial

Wondering why it's so important to learn how to caulk? Well, in the Agruso house, caulk is one of our absolute best friends. We are self-taught DIYers, so our joints and seams aren’t always perfect. But you know what?! That’s totally okay because caulk can finish off pretty much any project and make it look perfect. I can't count the number of times during a DIY project that I say, “No problem. I can caulk that.” Not kidding.

Kids will love helping you make this DIY Solar System. Kids love learning about space, so painting all the styrofoam planets will really spark their interest in space.? Like these Earth Day Crayons, this is a science project for kids.

When looking for cool tapestry wall hangings, you can either settle for what is popular with the average shopper out there or can opt for the real deal in the form of sun and moon tapestry wall hangings. What makes these wall hangings different from the rest? Well, to begin easy, they are probably the closest you will ever get to the sun and the moon.

custom gift for Graduation | vintage cushion covers | funny pillow cases |

Powered by custom gift for Graduation @2018 RSS Sitemap html Sitemap

Copyright 站群系统 © 2013-2019 Personalize